[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
|
From: |
paul needham <paul.2.needham-at-btconnect.com> |
|
Subject: |
Re: opinons on my progress so far [TANKS] |
|
Date: |
Sun, 06 Mar 2005 09:41:10 +0000 |
|
Reply-To: |
tanks-at-rctankcombat.com |
Billy
Not sure of the KCM current draw but at say 10amps I only have 120 watts
per motor this is barely enough.
Paul
At 11:40 05/03/2005, you wrote:
>Paul
>
>I have several choices of motor, I have the following in my collection
>at the momment
>
>2 x 300 watt scooter motors
>2 x 100 watt scooter motors
>2 x 150 Gold Motors http://www.technobots.co.uk/en-gb/dept_201.html
>2 x 18v cordless drill motors
>2 x KCM
>
>( I was in to buliding battlebots for a while )
>
>
>Billy
>
>
>On Sat, 05 Mar 2005 11:17:00 +0000, paul needham
><paul.2.needham-at-btconnect.com> wrote:
> > Billy
> >
> > Tried a Sadolin black stain from B&Q but the shiny MDF doesn't soak it up
> > and as that is the running surface it soon scuffs up , already had one
> > re-coat but now it has lost a couple of teeth at least from one side so
> > needs a overhaul again.
> > Still not finished top but will get back to it when it gets warmer.
> >
> > what are you using for motors ? the KCM's I have are fine until the grass
> > gets longer than about 3" long and tuffty , there is no power for turns and
> > it will only just move forward !
> > Paul
> > At 10:47 05/03/2005, you wrote:
> >
> > >Hi Paul,
> > >
> > >I followed the link to your site, nice work with your track, what did
> > >you seel the MDF with?
> > >
> > >Billy
> > >
> > >
> > >On Sat, 05 Mar 2005 09:04:13 +0000, paul needham
> > ><paul.2.needham-at-btconnect.com> wrote:
> > > > Billy
> > > >
> > > > keep up the good work , have you seen this site ?
> > > > http://www.thedecoy.org/1/6th/
> > > >
> > > > They built a T34 goes ok but their track system[not TTS ] gives them
> > > problems.
> > > > Mine has lost a couple of teeth but has never failed in use.[ COME
> OFF !!]
> > > > Paul
> > > > At 22:55 01/03/2005, you wrote:
> > > >
> > > > >Hi All,
> > > > >
> > > > >My name is Billy Westbury from Glasgow Scotland.
> > > > >
> > > > >I would like your opinion ( and encouragement ) on my progress so
> > > > >far, attached are a few pictures of my T-34-85 ( based on Tank #005 ),
> > > > >the hull is made from 12mm Ply painted with grey primer, the road
> > > > >wheels are salvaged from old supermarket (shopping mall carts)
> > > > >trolleys ;-).
> > > > >
> > > > >
> > > > >
> > > > >does it deserve an offical allocation yet?
> > > > >
> > > > >Billy
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >No virus found in this incoming message.
> > > > >Checked by AVG Anti-Virus.
> > > > >Version: 7.0.300 / Virus Database: 266.5.2 - Release Date: 28/02/2005
> > > >
> > > > --
> > > > No virus found in this outgoing message.
> > > > Checked by AVG Anti-Virus.
> > > > Version: 7.0.308 / Virus Database: 266.6.2 - Release Date: 04/03/2005
> > > >
> > > >
> > >
> > >
> > >
> > >
> > >--
> > >No virus found in this incoming message.
> > >Checked by AVG Anti-Virus.
> > >Version: 7.0.308 / Virus Database: 266.6.2 - Release Date: 04/03/2005
> >
> > --
> > No virus found in this outgoing message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.308 / Virus Database: 266.6.2 - Release Date: 04/03/2005
> >
> >
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.308 / Virus Database: 266.6.2 - Release Date: 04/03/2005
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.6.2 - Release Date: 04/03/2005